Set-off and blocking in the pile with metallized stock
High severitySymptoms
Sheets welded together; ink transferred to the metallized face of the sheet above
Probable causes
- Fully closed surface + slow-drying ink + full contact between smooth surfaces: the worst possible set-off scenario
The Print Guy · 2026-10-05
Other problems in this category
Metallized · TPG-133
Ink won't adhere on metallized board/paper
Ink scratches or lifts with tape; zero or patchy adhesion
Metallized · TPG-134
Slow or no drying on metallized stock
Ink wet for hours or days; total set-off; finishing impossible
Metallized · TPG-135
Printed color looks different over the metallic base
Colors come out 'metallic', dark or shifted versus the proof approved on white
Metallized · TPG-137
Scratching and marking of the metallized surface
Scratches visible at any light angle; metallized stock shows every contact
Metallized · TPG-140
Coatings and finishes on metallized stock
Coating crawls, fish eyes, poor laminate or spot-UV adhesion on the metal
Metallized · TPG-141
Metallic layer cracking at creases and folds
White or grey lines at folds: the metal layer fractures and loses its mirror