Metallized problems: causes and fixes
9 Metallized problems in offset and finishing: symptoms, causes and how to spot them. Step-by-step fixes with your account.
Metallized · TPG-133
Ink won't adhere on metallized board/paper
Ink scratches or lifts with tape; zero or patchy adhesion
Metallized · TPG-134
Slow or no drying on metallized stock
Ink wet for hours or days; total set-off; finishing impossible
Metallized · TPG-135
Printed color looks different over the metallic base
Colors come out 'metallic', dark or shifted versus the proof approved on white
Metallized · TPG-137
Scratching and marking of the metallized surface
Scratches visible at any light angle; metallized stock shows every contact
Metallized · TPG-139
Set-off and blocking in the pile with metallized stock
Sheets welded together; ink transferred to the metallized face of the sheet above
Metallized · TPG-140
Coatings and finishes on metallized stock
Coating crawls, fish eyes, poor laminate or spot-UV adhesion on the metal
Metallized · TPG-141
Metallic layer cracking at creases and folds
White or grey lines at folds: the metal layer fractures and loses its mirror
Metallized · TPG-136
Insufficient or uneven covering white
Zones where color looks more metallic than others; white looking grey or translucent
Metallized · TPG-138
Static and feeding problems with metallized stock
Doubles, stuck sheets, shocks; the stock 'sparks' when separated