Uneven gripper pressure across the bar
High severitySymptoms
Sheet enters straight but leaves rotated; registration opens toward one side of the sheet (fan-out is a different defect, symmetrical toward the tail: see TPG-211)
Probable causes
- Some grippers hold more than others
- fatigued springs on part of the bar
- localized wear
- grippers dirty with dried ink or paper dust
- gripper bite misadjusted on part of the bar
- opening/closing timing offset on one side
Create a free account to see the fix
Includes 5 steps and prevention
The step-by-step solution and prevention for this problem are in your account. A free account shows 1 full solution per day; paid plans are unlimited.
The Print Guy · Reviewed on 12 Oct 2026
Other problems in this category
Grippers/Sheet travel · TPG-204
Gripper pressure calibration (procedure)
Unstable registration with no apparent cause; sheets moving in transfer
Grippers/Sheet travel · TPG-206
Sheet released at high speed
Sudden waste, sheet crashed inside the press, possible blanket damage
Grippers/Sheet travel · TPG-207
Gripper-to-gripper transfer out of time
Fine doubling, variable circumferential registration, marks at the gripper edge
Grippers/Sheet travel · TPG-210
Grippers broken or bent by a jam
After a jam: impossible registration, new marks, transfer noise
Grippers/Sheet travel · TPG-208
Gripper-edge damage to the sheet
Torn, dented or marked lead edge; problems cutting and finishing later
Grippers/Sheet travel · TPG-209
Gripper marks on board or delicate stock
Shiny or dented pad prints on the finished piece's edge