Print-to-die registration shifted
High severitySymptoms
The cut doesn't match the printed image
Probable causes
- Paper dimensional change between printing and die-cutting
- register marks not used
- die mounted off-center
Create a free account to see the fix
Includes 4 steps and prevention
The step-by-step solution and prevention for this problem are in your account. A free account shows 1 full solution per day; paid plans are unlimited.
The Print Guy · 2026-10-05
Other problems in this category
Die-cutting/Cracking · TPG-162
Crease cracking on board
Board or print cracks when folded along the crease line; broken fibers visible
Die-cutting/Cracking · TPG-169
Rule loosening or jumping out of the die
Cuts shifting mid-run; rule visibly loose or fallen
Die-cutting/Cracking · TPG-173
Crease bursting on the inside
Board opens on the inner face of the fold although the outside looks fine
Die-cutting/Cracking · TPG-163
Incomplete cutting (won't release)
Blanks don't separate from the skeleton; must be forced
Die-cutting/Cracking · TPG-164
Burrs or fuzzy cutting
Rough edges, loose fibers along the cut
Die-cutting/Cracking · TPG-166
Blanks dropping early or sticking
The skeleton drags pieces or blanks fall ahead of time